Mini-Dispensers

 

MTI 190

MTI has introduced the Model 190, a quality, heavy duty, 13-90 liter/min Mini-Dispenser with single display, retail sales capability, including ATC and electronic calibration. The MTI 190 incorporates the EL 6.0 electronic register. For reviewing some of its features Click Here.

Features:- Meter

The unit features a quality PMP Corporation re-manufactured Tokheim 898K meter. This meter is noted in the Industry for its accuracy, reliability and durability at flow rates between 13 and 90 LPM. It is a vertical piston, positive displacement meter. Accurate at any pressure and delivery rate. Stainless Steel and other non-corrosive, rust resistant materials are used throughout. PMP Corporation re-manufactured meters include:

™ All new leathers, O-Rings, seals and gaskets. All dynamic seals and O-Rings are made of high cost Viton® or Teflon® to give reliable performance with alcohol blended fuels.

™ Bearings and bushings checked for wear and replaced as needed.

™ Worn shafts are replaced or reground and hard chrome plated.

™ All Valves and Valve seats are machine lapped to a flatness of 0.000033". This is done on special equipment where accuracy is checked daily.

™ Aluminum Valves or valves seats are re-hard coated on an as needed basis.

Features:- Housing

The cabinet is made from heavy gauge steel, powder coated in the color of your choice, with stainless steel side trim. The cabinet can be mounted in a variety of configurations, including on an optional pedestal base.

 




Check the prices with our distributor at http://www.npdl.com/pum02.htm

 

MTI 190MS

 

MTI has also introduced the Model 190 Medium Speed, a high quality, heavy duty, 15-150 liter/min Mini-Dispenser with single display, retail sales capability, including ATC and electronic calibration. The MTI 190 incorporates the EL 6.0 electronic register. For reviewing some of its features Click Here.

 

Features:- Meter

The unit features a quality new TCS (Total Control Systems) Model #682-15-L 1 ˝" positive displacement meter. This reciprocating 3 piston positive displacement meter is capable of 150 PSI maximum (10.5 BAR) working pressures at temperatures between -28.9 C and 93.3 C (-20.0 F to 200 F). The meter is approved for trade use in Canada at flow rates between 15 and 150 LPM. The 682 meter is a true Positive Displacement Meter, with the inlet and outlet on the same horizontal plain.

Features:- Optional Mounting

The dispenser cabinet comes complete with 4 - 5/16" NC Pemnuts pressed into the cabinet base for optional mounting onto:

a.) Customer supplied tank skid structure.

b.) Optional Pedestal base.

c.) Optional “full size” dispenser base (for use on Service Station Island)
Please check some of the pedestal options shown below.

.





Check the prices with our distributor at:http://www.npdl.com/pum02.htm

MTI 190 brochure

MTI 190MS brochure

Order/Quote Sheet

Short white pedestal


Tall stainless pedestal








Back to our products page.